Hydro Excavation
Non-destructive digging that exposes a live line without touching it. Water cuts the soil, vacuum lifts it, and nothing mechanical ever reaches the utility.
Spartanburg County
The I-85/I-26 junction, a century of mill infrastructure, and the distribution corridor built on top of it.
Protect What's Below.
Spartanburg sits where I-85 and I-26 cross, which is why so much of the Upstate's industrial and distribution floor space is here, and why so much of it went up quickly on sites that already had something underneath them.
The county carries two distinct problems in the same postcode. The mill-era core has utility whose records are incomplete by a century, much of it private line inside old plant footprints that no public locator will mark. The new corridor along the interstate has large paved sites with extensive stormwater systems that fill with construction sediment before they are ever turned over.
Both are vacuum-truck work: one because nobody knows what is down there, the other because the drains have to be emptied and the material has to leave.
Old industrial sites are full of line past the meter — process water, steam, power, abandoned runs. An 811 ticket covers none of it.
Large roofs and large lots mean large storm systems, and sediment washed in during construction does not leave on its own.
Bore pits, crossings and utility relocations along a right-of-way where a strike closes a lane as well as a schedule.
Non-destructive digging that exposes a live line without touching it. Water cuts the soil, vacuum lifts it, and nothing mechanical ever reaches the utility.
A small hole, straight down to the line, so you have its real depth and offset on paper before a crew commits to anything.
A narrow vacuum-cut trench for conduit, cable or small-diameter pipe — a fraction of the surface damage an open cut leaves behind.
High-pressure jetting with vacuum recovery — the blockage comes out of the pipe and leaves on the truck, not into the next structure downstream.
GPR, electromagnetic locating and camera-and-sonde work on the private lines past the meter — the ones 811 does not come out for.
Common questions
Based in Upstate South Carolina, working across North and South Carolina. If you are not sure whether your site is in range, call — distance is a scheduling question rather than a yes or no.
Because 811 marks utility-owned lines, generally up to the meter or demarcation point, and nothing beyond it. Site lighting, irrigation, the feed to a pump house, gas to a generator, the sewer lateral, fiber between two buildings on one campus — all of it belongs to the property owner, and no public locator is coming out for any of it. On commercial, industrial and institutional ground that is most of what is in the way.
A locate tells you a line is somewhere under a painted mark, within a tolerance. A pothole is a small excavation that exposes the line so you can measure its actual depth, offset, size and condition. One is an estimate from the surface; the other is a measurement of the thing itself. Design work and bore clearance generally need the second.
That depends on where the work is, what it involves, and what is already scheduled — so rather than publish a number we cannot honor on every job, call and you will get a straight answer about this week.
Tell us where it is and what is in the way.