Hydro Excavation
Non-destructive digging that exposes a live line without touching it. Water cuts the soil, vacuum lifts it, and nothing mechanical ever reaches the utility.
Service
Clean the line and take the debris with us.
Protect What's Below.
Carolina Hydrovac Inc. provides professional sewer and storm-drain jetting to remove accumulated dirt, sediment, grease, roots and other obstructions that restrict flow. Using high-pressure water combined with powerful vacuum capabilities, we can clean pipes, culverts, catch basins and drainage structures while containing and removing the loosened debris.
The vacuum is the part that matters. Jetting on its own relocates a blockage — it breaks the mass up and pushes it to the next structure downstream, where it becomes somebody's problem on a later date. A combination unit lifts the material out of the system entirely, so the line is clean and stays that way for the interval the material took to build up in the first place.
Jetting on its own relocates a blockage. It becomes somebody's problem on a later date.
Whether addressing an active blockage or performing preventive maintenance, our jetting services help restore flow and keep sewer and stormwater systems operating efficiently.
Depth, condition, what is in it and where it goes. A basin full of construction sediment and a line closed by roots are different jobs with different nozzles.
A nozzle is run to the far end and drawn back, cutting the deposit off the pipe wall and carrying it toward the access point rather than deeper into the system.
Debris is lifted from the structure as it arrives. Nothing is flushed downstream, which is both the point of the method and, on most municipal systems, the requirement.
A clean pipe is the precondition for any useful CCTV inspection. Most inspection failures are a dirty line, not a bad camera.
Pre-camera cleaning so the survey shows the pipe rather than what is sitting in it.
Sediment washed into a new system during site work will not clear itself, and it is usually the contractor's to remove before turnover.
Catch basins, trench drains and wash-bay pits fill at a predictable rate. Cleaning them on a schedule costs less than the flooding that follows when they stop working.
An active blockage in a lift station, a lateral or a parking-lot drain, where the flow has to be restored now.
Common questions
No. A rod punches a hole through a blockage and restores flow; jetting cuts the deposit off the pipe wall around the full circumference. With vacuum recovery the material then comes out of the system entirely, rather than moving downstream to settle somewhere else and come back.
At whatever interval yours actually fill, which depends on the site — a wooded lot, a truck yard and a car wash produce completely different rates. The useful pattern is to clean once, see what came out, and set the schedule from that rather than from a rule of thumb.
It is contained in the tank and hauled off for disposal. Keeping the debris out of the downstream system is the reason for using a combination unit rather than a jetter alone.
Yes — wet wells, lift stations, trench drains, wash-bay pits and similar structures are all vacuum work. Describe the structure, its depth and what is in it when you call, because those three decide the approach.
Tell us where it is and what is in the way. Photographs and a site plan get you a far more accurate number.