Serving North and South Carolina

Emergency service available

(864) 706-9511

What we do

Three services, five ways in

Digging, cleaning and locating are one problem seen from three angles: knowing what is under the ground before something expensive finds out the hard way.

Protect What's Below.

Hydro Excavation

Non-destructive digging that exposes a live line without touching it. Water cuts the soil, vacuum lifts it, and nothing mechanical ever reaches the utility.

What this involves

Who calls

The work comes from six directions

General contractors

Clearing bore paths, exposing crossings, and finding out what is in the way before the crew arrives rather than after.

Utility contractors

Potholing, bore pits, valve and meter exposure, and slot trenching in corridors already carrying four other services.

Municipalities

Storm and sanitary maintenance, catch basins and culverts, lift stations, and excavation in rights-of-way where a strike closes a road.

Engineering and SUE

Test holes at the design stage, depth and offset captured as data, and conflicts resolved on a drawing instead of in a trench.

Industrial and plants

Private utility inside working facilities, where operations do not stop and no public locate applies.

Property and facilities

Drainage that has stopped draining, wash-bay pits, parking-lot systems, and service runs nobody has a record of.

Not sure which one you need?

Most callers describe a situation rather than a service, which is the right way round.

"There's a line somewhere under the parking lot and we're boring next week" is a locate and a pothole. "The drain behind the building stopped draining" is jetting. "The drawing says the gas main is four feet down and the drawing is from 1988" is a test hole. Describe the problem and you will get told which method fits — including when the answer is a machine rather than a hose.

Talk it through

(864) 706-9511

Describe the site, what is in the way and what the surface has to look like afterwards. You will get a straight answer about whether this is the right method.

Request a quote
  • Serving North and South Carolina
  • Emergency service available

Common questions

Questions that come up first

What is hydro excavation?

Digging with pressurized water and a vacuum instead of a mechanical bucket. A handheld wand cuts the soil into slurry and a boom-mounted hose lifts it straight into a debris tank on the truck. Because nothing solid ever enters the hole, the method can work within inches of a live utility without damaging it. It is also called vacuum excavation, soft digging, or — when the goal is simply to see a line — daylighting or potholing.

Why not just use a backhoe?

Because a bucket cannot detect a utility, it can only find one. On open ground with nothing underneath it, mechanical excavation is faster and cheaper and you should use it. The calculation changes when there is live line in the hole, when the surface above has to be put back, or when the ground is stiff Piedmont clay that a machine has to fight. Then the slower cut is usually the cheaper job once restoration and risk are in the number.

We called 811. Why would we need a private locate?

Because 811 marks utility-owned lines, generally up to the meter or demarcation point, and nothing beyond it. Site lighting, irrigation, the feed to a pump house, gas to a generator, the sewer lateral, fiber between two buildings on one campus — all of it belongs to the property owner, and no public locator is coming out for any of it. On commercial, industrial and institutional ground that is most of what is in the way.

Is jetting the same as running a rod or a snake?

No. A rod punches a hole through a blockage and restores flow; jetting cuts the deposit off the pipe wall around the full circumference. With vacuum recovery the material then comes out of the system entirely, rather than moving downstream to settle somewhere else and come back.

What area do you cover?

Based in Upstate South Carolina, working across North and South Carolina. If you are not sure whether your site is in range, call — distance is a scheduling question rather than a yes or no.

What do you need from me to quote a job?

Where it is, what is in the way, what surface it is under, and what the finished condition has to be. Photographs and any as-built or site plan you have make the quote considerably more accurate — the contact form takes file uploads for exactly that.

Need a safe, reliable solution?

Tell us where the job is and what is in the way.